Application Guide

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB
NVGB) Issue BF, February 21, 2014
Page 15 of 72
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
List 118: Blank Distribution Panel Cover, 8-Panel Bay
Features
♦ Covers an unused Distribution Panel position.
Restrictions
For use in List 105 or List 108 only.
Ordering Notes
1) Order one (1) List 118 for each position in the bay that is NOT populated with a
Distribution Panel.
List 120: Distribution Panel, 6-Panel Bay
Features
♦ Twenty (20) TLS/TPS fuse positions, or ten (10) TPL fuse positions, or a
combination of TLS/TPS and TPL fuse positions.
♦ Includes (20) TLS/TPS Fuseholders P/N 248817100. For panels factory
configured in a bay, each TPL Fuseholder P/N 516241 ordered replaces (2) P/N
248817100 Fuseholders.
♦ See Load Distribution Connections under Wiring Illustrations in ACCESSORY
DESCRIPTIONS for load termination specifications.
Restrictions
640A maximum continuous.
For use in List 106 or List 107 only.
Ordering Notes
1) Order as required.
2) Specify twenty (20) TLS/TPS fuseholders, or up to ten (10) TPL fuseholders, or a
combination per distribution panel (all positions MUST be filled). This instructs the
factory how to configure the Distribution Panel. Also specify mounting location for
each configured Distribution Panel per bay. This instructs the factory where to
mount each configured Distribution Panel per bay.
3) Order distribution fuses and load lugs as required per Distribution Devices and Lug
Selection in ACCESSORY DESCRIPTIONS.
4) Replacement panels will be equipped with 20 TLS/TPS Fuseholders. TPL
fuseholders (P/N 516241) may be ordered to field modify the distribution panel.
One TPL fuseholder takes the space of two TLS/TPS fuseholders.
List 125: Distribution Panel, 6-Panel Bay
Features
♦ Twenty-Eight (28) bullet nose circuit breaker and/or TLS/TPS fuse (with bullet
nose fuseholder) positions.
♦ See Load Distribution Connections under Wiring Illustrations in ACCESSORY
DESCRIPTIONS for load termination specifications.
Restrictions
640A maximum continuous.
For use in List 106 or List 107 only.
Caution: Circuit breaker with a 150 ampere or greater rating SHALL HAVE an
empty mounting position between it and any other overcurrent protective
device.
Home
Home