Application Guide

ManualsBrandsEmerson ManualsDC PowerEmerson NetSure 801DB

SAG582120600

System Application Guide

Spec. No. 582120600 (Model 801DB

NVGB)

Issue BF, February 21, 2014

Page 1 of 72

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.

SYSTEM OVERVIEW

Description: The NetSure™ 801DB NVGB DC Power Distribution is a -48V Battery Distribution Fuse /

Circuit Breaker Bay (BDF/CBB).

• The NetSure™ 801DB

NVGB can be ordered as an 8-distribution panel or 6-distribution

panel bay (4 or 3 panels per side).

• Each distribution panel can be configured for separate inputs giving you an 8-load or

6-load bay (must use an external ground/return bar), or the panels per side can be

paralleled to allow one feed per side giving you a 2-load bay (may use the optional

internal ground/return bar). Other configurations include an 8-panel bay with 4-loads and

two loads, and a 6-panel bay with 4-loads (paralleling the top two panels or paralleling

the bottom two panels per side).

• Each bay can be equipped with an optional “full bay length” internal ground/return bar

(per side) (configuration restrictions apply). Another option includes replacing one

(8- and 6-panel bays) or two (8-panel bay only) distribution panels per side with a “panel

length” internal ground/return bar.

• Each bay can easily be configurable for top or bottom feed.

• Each bay is equipped with a digital meter assembly. The List 105 and 107 bays provide

a basic digital meter, which is capable of displaying system load voltage and current on

each Distribution Panel. An advanced Digital Meter/Alarm Panel is provided in the List

106 and 108 bays. In addition to the basic metering functions, this panel provides Low

Voltage, Power Lost, Over-current and Fuse/Circuit Breaker alarms for each panel in the

bay. Also provided are four (4) external alarm relay circuits, to which any combination of

alarms can be mapped. This Meter Panel comes with a comprehensive Web page

capability for remote system management.

Family: NetSure™

Spec. No.: 582120600

Model: 801DB

NVGB

Output Voltage: -48 Volts DC

Output Capacity: 640A continuous per Distribution Panel

8-Panel Bay; 2400A Maximum per Side, 4800A Maximum per Bay

6-Panel Bay; 1800A Maximum per Side, 3600A Maximum per Bay

Agency Approval: UL Listed ("cULus"), NEBS

Framework Type: Seismic Rated (Zone 4) Box Framework

Mounting Width: 26”

Mounting Depth: 15”

Mounting Height: 84”

Access: Front and Rear for Installation, Front for Operation and Maintenance

Color: Textured Gray (M500-147)

Environment: 0°C to +40°C (+32°F to +104°F)

Home

Summary of content (72 pages)

PAGE 1
SAG582120600 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Issue BF, February 21, 2014 Home SYSTEM OVERVIEW Description: The NetSure™ 801DB NVGB DC Power Distribution is a -48V Battery Distribution Fuse / Circuit Breaker Bay (BDF/CBB). • The NetSure™ 801DB NVGB can be ordered as an 8-distribution panel or 6-distribution panel bay (4 or 3 panels per side).
PAGE 2
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home 8-Panel Bay 6-Panel Bay Page 2 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 3
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Eight Panel Bay List 105 or List 108 (Common Equipment) List 116 (Optional Internal ‘Full Bay Length’ Ground/Return Bar) Box Framework Extension (1’, 2’, or 4.
PAGE 4
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 5
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Six Panel Bay List 106 or List 107 (Common Equipment) List 126 (Optional Internal ‘Full Bay Length’ Ground/Return Bar) Box Framework Extension (1’, 2’, or 4.
PAGE 6
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 7
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) TABLE OF CONTENTS System Overview Picture List Descriptions Accessory Descriptions Specifications Physical Size Information Related Documentation SYSTEM OVERVIEW................................................................................................................................................. 1 Eight Panel Bay .........................................................................
PAGE 8
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Bullet Nose-Type Circuit Breakers, Bullet Nose-Type Fuseblocks e/w TLS/TPS Fuses, and Lug Selection for Lists 115 and 125 ...................................................................................................................... 35 Box Framework Extensions .............................................................................................................................
PAGE 9
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) LIST DESCRIPTIONS For Bays being Currently Manufactured (Model 801DB NVGB) Home List 105: Common Equipment, 8-Panel Bay, w/ Basic Metering Features ♦ List 105 provides the common equipment for an 8-Distribution Panel BDF/CBB (Battery Distribution Fuse/Circuit Breaker Bay) with basic metering. ♦ Configurable for top or bottom feed.
PAGE 10
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) List 106: Common Equipment, 6-Panel Bay, w/ Advanced Metering Features Home ♦ List 106 provides the common equipment for a 6-Distribution Panel BDF/CBB (Battery Distribution Fuse/Circuit Breaker Bay) with advanced metering. ♦ Configurable for top or bottom feed. ♦ Consists of a 7’H x 26”W x 15”D welded box framework (seismic, zone 4 earthquake compliant).
PAGE 11
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) 15) Order bay frame grounding lugs as required per Bay Frame Grounding Wire Sizes and Lugs Selection under Wiring Notes in ACCESSORY DESCRIPTIONS. 16) For remote access capability, order one (1) List 170 Ethernet option.
PAGE 12
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) List 108: Common Equipment, 8-Panel Bay, w/ Advanced Metering Features Home ♦ List 108 provides the common equipment for an 8-Distribution Panel BDF/CBB (Battery Distribution Fuse/Circuit Breaker Bay) with advanced metering. ♦ Configurable for top or bottom feed. ♦ Consists of a 7’H x 26”W x 15”D welded box framework (seismic, zone 4 earthquake compliant).
PAGE 13
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) 15) Order bay frame grounding lugs as required per Bay Frame Grounding Wire Sizes and Lugs Selection under Wiring Notes in ACCESSORY DESCRIPTIONS. 16) For remote access capability, order one (1) List 170 Ethernet option. Home List 110: Distribution Panel, 8-Panel Bay Features ♦ Twelve (12) TLS/TPS fuse positions, or six (6) TPL fuse positions, or a combination of TLS/TPS and TPL fuse positions.
PAGE 14
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) List 116: Optional Internal Ground/Return Bar, 8-Panel Bay (Full Bay Length) Home Features ♦ Provides two full bay length internal ground/return bars (one per side). ♦ See Load Distribution Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for load termination specifications. ♦ Includes two (2) Input Lug Landing Plate Assemblies (one per side).
PAGE 15
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) List 118: Blank Distribution Panel Cover, 8-Panel Bay Home Features ♦ Covers an unused Distribution Panel position. Restrictions For use in List 105 or List 108 only. Ordering Notes 1) Order one (1) List 118 for each position in the bay that is NOT populated with a Distribution Panel.
PAGE 16
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Ordering Notes 1) Order as required. 2) Specify mounting location for each Distribution Panel per bay. This instructs the factory where to mount each Distribution Panel when the bay is populated with different types of Distribution Panels. 3) Order distribution fuses, fuseholders, circuit breakers, and load lugs as required per Distribution Devices and Lug Selection in ACCESSORY DESCRIPTIONS.
PAGE 17
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Ordering Notes 1) Order as required. Order one (1) List 127 for a fully configured bay. 2) Specify top feed or bottom feed to instruct the factory to mount the Internal Ground/Return Bars at the top or bottom of the bay. 3) Order load lugs as required per Distribution Devices and Lug Selection in ACCESSORY DESCRIPTIONS.
PAGE 18
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) List 143: Bay Input Feed and Shunt Assembly (4 Cables, 25 mV. Shunts) ♦ Provides landing points for four (4) input leads (on each side). ♦ Provides an 800A, 25mV shunt (one per side). ♦ Can be rotated for top or bottom feed configurations. Home See DC Input Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for input termination specifications.
PAGE 19
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) List 145: Bay Input Feed and Shunt Assembly (2 Cables, 50 mV. Shunts) Features ♦ Provides landing points for two (2) input leads (on each side). ♦ Provides an 800A, 50mV shunt (both sides). ♦ Can be rotated for top or bottom feed configurations. Home See DC Input Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS for input termination specifications.
PAGE 20
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home List 148: 2400A Ground/Return Input Assembly, with Optional Bonding Strap Features ♦ Provides additional landing points for ground/return input leads (both sides) to the optional List 116 or 126 Internal Ground/Return Bar. ♦ Increases Ground/Return Bar rating from 1200A to 2400A. ♦ Each List 148 provides two (2) Input Lug Landing Plate Assemblies (one per side).
PAGE 21
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home List 151: Dressing Bar Features Provides adjustable grooming bar to allow customer to dress output load cables along the sides of the bay. Restrictions For use in Lists 105, 106, 107 and 108. Ordering Notes 1) Order dressing bars as required. 2) Maximum of eight (8) dressing bars to be ordered for an eight (8) panel bay (List 105 or 108).
PAGE 22
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home List 166: Meter Panel Field Upgrade Retrofit Kit Features ♦ Provides components to replace the standard meter panel in a List 107 bay with the Advanced Meter/Alarm Panel. ♦ Includes an Advanced Meter/Alarm Panel that provides the following functions for each panel in the bay: voltage and current metering and Low Voltage, Power Lost, Overcurrent, and Fuse/Circuit Breaker alarms.
PAGE 23
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home List 168: Meter Panel Field Upgrade Retrofit Kit Features ♦ Provides components to replace the standard meter panel in a List 105 bay with the Advanced Meter/Alarm Panel. ♦ Includes an Advanced Meter/Alarm Panel that provides the following functions for each panel in the bay: voltage and current metering and Low Voltage, Power Lost, Overcurrent, and Fuse/Circuit Breaker alarms.
PAGE 24
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) For Manufactured Discontinued Bays (Model 1293V3) Home See Issue AR SAG582120600 for List Descriptions.
PAGE 25
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 26
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home ACCESSORY DESCRIPTIONS Load Lug Hardware Kits Features ♦ These kits provide hardware for connecting customer-furnished Load and Load Return (internal full-length ground bar only) lugs. • Part No. 547682 kit provides (35) each of 1/4” flat washers, 1/4” lock washers and 1/420 hex nuts. • Part No. 547683 kit provides (60) each of 1/4” flat washers, 1/4” lock washers and 1/420 hex nuts.
PAGE 27
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 28
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Right Angle Lug Adaptor Kits, P/Ns 556377 and 556378 Features ♦ These kits allow for load connections to the List 115, 116, 125, and 126 panels at right angle to the standard connection and also allows for use of up to 4/0 AWG wire. The lug adapters are designed for use with 2-hole lugs with 3/8” clearance holes on 1” centers. The lug adapters permit installation of cables back to back.
PAGE 29
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home External Return/Ground Bar Assemblies Return/Ground Bar Assemblies 8 Panel Bay Return/Ground Bar Assembly 436110200 6 Panel Bay Return/Ground Bar Assembly 436110300 Bonding Strap Kit 534834 Ordering Notes 1) Order Return/Ground Bar Assembly(s) as required. One (1) per bay provides landing positions for each fuse position in the bay assuming that cables are terminated back to back.
PAGE 30
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Seismic Anchor Kit, P/N 545387 Features ♦ Provides four (4) Relay Rack Seismic Mounting Anchors, P/N 216821200. Restrictions For use with Lists 105, 106, 107 and 108. Ordering Notes 1) Order Seismic Anchor Kit P/N 545387 as required. Transient Voltage Surge Suppressor (TVSS) Device Features ♦ When properly grounded, the device(s) suppresses transient voltages that are above 60 VDC.
PAGE 31
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Distribution Devices and Lug Selection TLS/TPS Fuses/Fuseblocks, TPL Fuses/Fuseblocks, and Lug Selection for Lists 110 and 120 Features ♦ Each fuse installs into the respective fuseblock. Restrictions The fuses and fuseblocks specified in this section are for use in Lists 110 and 120. Load should not exceed 80% of device rating. Distribution Panel capacity is 640A maximum continuous.
PAGE 32
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 33
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Lists 110 and 120 TPL Fuseblock GMT-18/100A Alarm Fuse (P/N 248610301) and GMT-X Safety Fuse Cover (P/N 248898700) (Both are provided w/ fuseblock) 5/16-18 swage studs for installation of customer provided single hole lugs. Max. Lug Width 1.8". Max. Wire Size 2/0 AWG.
PAGE 34
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home TPL Fuses and Fuseblock for Use in Lists 110 and 120 Ampere Rating Required Distribution Bus Mounting Positions P/N 70 2 248251500 80 2 248252000 100 2 248252600 150 2 248253300 200 2 248254000 225 2 248254500 250 2 248255000 Lugs for Fuseblock P/N 516241 See Table 4 Each fuse requires (1) Fuseblock P/N 516241. See “Ordering Notes” in this section.
PAGE 35
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Bullet Nose-Type Circuit Breakers, Bullet Nose-Type Fuseblocks e/w TLS/TPS Fuses, and Lug Selection for Lists 115 and 125 Features ♦ Home Each circuit breaker plugs into one, two or three distribution device mounting position(s). A single fuseblock provides for installation of a 3 to 125 ampere Bussmann TPS-type or Littelfuse TLS-type fuse.
PAGE 36
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 37
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 38
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 39
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 40
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Special Lugs and Adapters Referenced in Table 7 Special Lug (See Table 7 for Part Numbers) Special Adapter P/N 545346 Special Lug and Adapter 3-Pole Lug Adapter Kit, P/N 547991 Right Angle Lug Adapter Kit, P/N 556377 Right Angle Lug Adapter Kit, P/N 556378 Page 40 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 41
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Box Framework Extensions One (1) Foot Box Framework Extension Features The 1 Foot Box Framework Extension allows a standard 7 foot box framework to extend to 8 feet. Restrictions For use in Lists 105 106, 107 and 108. Ordering Notes 1) Order as required, P/N 544201.
PAGE 42
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Wiring Notes Refer also to the next section, Wiring Illustrations. Bay Frame Grounding Wire Sizes and Lugs Selection Features ♦ 1/4” clearance holes on 5/8" centers are provided for installation of customer provided two-hole lugs. Restrictions All lugs for customer connections must be ordered separately. Customer needs to supply lug mounting bolts and hardware.
PAGE 43
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Ordering Notes 1) Recommended Wire Size (Auxiliary Fuse load and return): 14 AWG 2) Recommended Wire Size (Ground/Return Input busbars): 14 AWG Home Load Distribution Wire Sizes Selection Features ♦ Load distribution (load side) leads terminated in the appropriate lug are connected to the ‘load side’ terminations provided on each Distribution Panel.
PAGE 44
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 45
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 46
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 47
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home DC Input Cable Sizes and Lugs Selection Features DC input (-48V) leads terminated in the appropriate lug are connected to the List 145 Bay Input Feed and Shunt Assembly. See DC Input Connections under Wiring Illustrations in ACCESSORY DESCRIPTIONS.
PAGE 48
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 49
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Bay Frame Grounding Connection Detail A Bay Frame Grounding Connection 1/4" clearance holes on 5/8" centers are provided for installation of customer provided two-hole lug. 1/4" clearance holes on 5/8" centers are provided for installation of customer provided two-hole lug. Top View Page 49 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 50
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) External Alarm and Meter/Alarm Card Input Connections Home Page 50 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc.
PAGE 51
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Internal/External “Ground/Return” (for digital meter and alarm circuit card power return) Connect as required. -48V Input - A Feed (for digital meter and alarm circuit card power input) Connect to an external source or to List 156 Internal Fuse Kit.
PAGE 52
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Detail B (Page 3) List 106 and 108 (shown) Ethernet and External Alarm Connections Input/Output Card Located behind Removable Panel Network J3 Ethernet Port J2 (Factory Connection) 1 TB9 For Future Use NOTE: 6 TB7 1 TB8 6 1 6 NO C NC NO C NC NO C NC NO C NC K1 K2 K3 K4 External Alarms See Note 1, 2 1. NO=Normally Open. C=Common. NC=Normally Closed.
PAGE 53
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home External Sense, ABS and Aux. Supply Connections Sense Option Jumper (P/N 144134) See Note 1 Internal Sense External Sense Auxiliary Fuse Card Located Behind Removable Panel F6 F5 F1 TB5 TB1 2 2 1 1 TB2 2 1 TB3 2 1 TB4 2 F2 F3 F4 1 See Note 2 NOTES: 4B (-48V) 3B (-48V) 2A (-48V) ABS_A ABS_B 1A (-48V) RTN EXT SNS See Note 1 -48V B RTN A -48V All fuses 1-1/3A.
PAGE 54
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Ground/Return Input Connections for Auxiliary Fuse Card +RTN A 10-32 threaded stud. See Note 1. +RTN B 10-32 threaded stud. See Note 2. NOTES: Rear View 1. Connect “+RTN A” to the system Ground/Return busbar. If the bay is configured for A/B operation, connect to the A side system Ground/Return busbar. 2.
PAGE 55
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No.
PAGE 56
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home -48V Load Connections to List 110 and 120 Distribution Panel 1/4-20 swage studs for installation of customer provided single hole lugs. (Torque to 72 in-lbs.) (Maximum Lug Width is 0.750”.) (Maximum Wire Size is 2 AWG.) 5/16-18 swage studs for installation of customer provided single hole lugs. (Torque to 132 in-lbs.) (Maximum Lug Width is 1.800”.) (Maximum Wire Size is 2/0 AWG.
PAGE 57
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Page 57 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
PAGE 58
SAG582120600 Issue BF, February 21, 2014 Detail C (Page 4) System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Optional Internal Ground/Return Busbar Connections (Distribution Panel Length, Replaces a Distribution Panel) Optional List 127 Ground Bar Assembly (Each List 127 provides two [2] Ground Bar Assemblies.) Optional List 117 Ground Bar Assembly (Each List 117 provides two [2] Ground Bar Assemblies.
PAGE 59
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Optional Internal Ground/Return Busbar Connections (Distribution Panel Length, Replaces a Distribution Panel) List 117 Ground Bar (8-Panel Bay) 14 SPACES ON 0.81 CENTERS = 11.38 26 SPACES ON 0.812 CENTERS = 21.125 15 SPACES ON 0.81 CENTERS = 12.19 Top Feed Right Side Left Side Bottom Feed List 127 Ground Bar (6-Panel Bay) 25 SPACES ON 0.812 CENTERS = 20.
PAGE 60
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Detail C (Page 6) Optional Internal Ground/Return Busbar Paralleling Bar Internal Ground Bar Assembly (P/O List 117) Paralleling Bar (List 139) Hardware Build-Up 3/8-16 x 1-1/4 Bolt 3/8 Belleville Lock Washer 3/8 Flat Washer Internal Ground Bar Assembly Paralleling Bar TORQUE TO 180 IN-LBS Page 60 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 61
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home DC Input Connections Top Feed Installations List 143 or 147 3/8” clearance holes/slots on 1.00” centers for installation of customerprovided two hole lugs. (Torque to 180 in-lbs) (Maximum Lug Width is 2.
PAGE 62
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Top Feed DC Input Connections (Battery Return Leads) Optional List 116 Internal Ground/Return Busbar Arranged for Top Feed (List 126 similar) Optional List 148 2400A Ground/Return Input Kit provides Additional DC Input Connections (Battery Return Leads) Optional bonding strap (P/O List 148) can be removed if not required.
PAGE 63
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Detail D (Page 3) Top Feed DC Input Connections (Battery Return Leads) Top Feed Installations 3/8" clearance holes on 1.00" centers for installation of customer provided two hole lugs. (Torque to 180 in-lbs) (Maximum Lug Width is 2.00") (Maximum Wire Size is 4/0 AWG) Optional List 117 Internal Ground/Return Busbar (List 127 similar) Portion of bay removed in illustration for clarity.
PAGE 64
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Replacement Alarm, Reference, and Control Fuses, List 105 and 107 Bays Home Fuseblock Located in Bay’s Top Center Features Control fuses are located on the fuseblock mounted in the top center of each bay. Note also that distribution fuses also contain alarm-type fuses as detailed in the previous sections of this document. Restrictions These fuses are not available for customer connected loads.
PAGE 65
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Replacement Circuit Cards, List 105 and 107 Bays Home Ordering Notes 1) Refer to the following table. Item P/N External Alarm Circuit Card 486339800 Replacement Circuit Cards, List 106 and 108 Bays Ordering Notes 1) Refer to the following table.
PAGE 66
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 DC Operating Voltage 1.1.1 Nominal: -48Vdc. 1.1.2 Range: -42Vdc to -60Vdc. Environmental Ratings 1.2.1 Operating Ambient Temperature Range: 0°C to +40°C (+32°F to +104°F). 1.2.2 Storage Ambient Temperature Range: -40°C to +80°C (-40°F to +176°F). 1.2.
PAGE 67
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) 1.6 Home Standard Features—Lists 106 and 108 1.6.1 Fuse/Circuit Breaker Mounting Positions: See description in Distribution Panel List Options section. 1.6.2 External Alarm Circuits: Four (4) relays each provide three (3) sets of Form-C contacts for external alarms. Various available alarms can be mapped to each of the relays. Contact rating is 2A at 30 VDC. 1.6.
PAGE 68
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home PHYSICAL SIZE INFORMATION Floor Hole Drilling Pattern Dimensions 0.750 Dia. (8 PLACES) 3/8-16 Welded Nut (4) 15.000 13.696 12.696 12.096 1.275 1.875 2.275 Front 23.475 23.875 1.400 2.400 3.000 24.475 26.000 Page 68 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 69
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Dimensions, 8-Bus Bay Page 69 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 70
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home Dimensions, 6-Bus Bay Page 70 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 71
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home RELATED DOCUMENTATION Schematic Diagram: Wiring Diagram: Instructions: SD582120600 (Power System) T582120600 (Power System) Section 5674 (Power System) Section 5823 (Pre-charge Assembly, Spec. No. 510142) Load and Battery Lug Detail Drawings: 031110100 through 031110300 Page 71 of 72 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 72
SAG582120600 Issue BF, February 21, 2014 System Application Guide Spec. No. 582120600 (Model 801DB NVGB) Home REVISION RECORD Issue Change Number (ECO) BB LLP218226 BC Date Approved Add new busbar kit P/N 556103. 02/22/2013 Khristebelle Ilagan LLP218456 Add right angle lug adapter kits P/Ns 556377 and 556378. 05/01/2013 John Jasko LLP219017 Auxiliary Fuse Card Connections illustration revised. Removed rocker handle bullet-nose circuit breakers. Revised notes for 556103.