Application Guide

SAG582140001 System Application Guide
Issue AN, June 4, 2014 Spec. No. 582140001 (Model 801
NLDB, 801NLEB, 801NL-B)
Page 38 of 115
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Replacement Alarm, Reference, and Control Fuses
Fuseblock Located in Bay’s Left Center
Features
♦ Alarm, reference, and control fuses are located on the fuseblock mounted in the left center of the Power
Bays and Distribution Bays. These fuses are not available for customer connected loads. Note also that
distribution fuses also contain alarm-type fuses as detailed in the previous sections of this document.
Ordering Notes
1) Order replacement fuses as required per Table 7 (Replaceable Alarm, Reference, and Control Fuses).
ASSEMBLY DESIG. FUNCTION
SIZE
(Amperes)
TYPE PART NO.
Power Bays
F1
LMS CPU
Circuit Card
Input Power
3 SAN-O AX-1 248609200
F2 -- -- -- --
F3
MCA/Router
Circuit Card
Input Power
3 SAN-O AX-1 248609200
-- Safety Fuse Cover -- SAN-O SAX-1 248898600
Distribution Bays
F1
Router
Circuit Card
Input Power
3 SAN-O AX-1 248609200
F2
Distribution Bus
Monitoring
Circuit Cards
Input Power
(Bus #1 and #2)
3 SAN-O AX-1 248609200
F3
Distribution Bus
Monitoring
Circuit Cards
Input Power
(Bus #3 and #4)
3 SAN-O AX-1 248609200
-- Safety Fuse Cover -- SAN-O SAX-1 248898600
Distribution
Fuseholder
Alarm Fuse
FA Fuse Alarm 18/100A
Bussmann
GMT-18/100A
248610301
--
Safety Fuse Cover
--
Bussmann GMT-X
248898700
Table 7
Replaceable Alarm, Reference, and Control Fuses
Home