Application Guide

System Application Guide SAG582140001
Spec. No. 582140001 (Model 801
NLDB, 801NLEB, 801NL-B) Issue AN, June 4, 2014
Page 17 of 115
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Restrictions
The LMS Monitoring System Main CPU circuit card is mounted in the Primary Power Bay only.
Ordering Notes
1) Order the optional LMS Monitor if increased monitoring capabilities are required. Order the LMS Main
CPU circuit card (List 50) for the Primary Power Bay. Order the LMS Expansion CPU circuit card (List 63)
for Secondary Power Bays that are to be equipped with LMS I/O circuit cards.
2) Order additional LMS Network cables as required per Replacement/Additional LMS Network Cables.
Note that an LMS Network cable is factory provided with List 63.
3) This List option only provides the LMS CPU circuit card for the Primary Power Bay, additional LMS
options must be ordered separately per SAG586505000.
List 63: Optional LMS Expansion CPU Circuit Card (Secondary Power Bays)
Features
♦ Allows LMS I/O cards to be installed in Secondary Power Bays.
♦ LMS Network bay interconnect cable provided (Qty. 1 P/N 514639).
Restrictions
The LMS Monitoring System Expansion CPU circuit cards are mounted in Secondary Power Bays (required
only if LMS I/O circuit cards are to be installed in the same bay).
Ordering Notes
1) Order the LMS Expansion CPU circuit card for Secondary Power Bays that are to be equipped with LMS
I/O circuit cards.
List 64: Interface Kit to a Spec. No. 582121900 Power System equipped with a DGU
Features
♦ Provides the following...
LMS Dual MCA Interface Software Option
LMS Gateway Software Option
P/N 526843 50’ LMS Dual MCA Option Cable
P/N 548009 50’ LMS Gateway Port Cable
♦ LMS Dual MCA Interface Software Option enables the Spec. No. 582140001 Power System to be
integrated with an existing Power System. Specifically, List 64 allows the MCA in Spec. No. 582140001
to interface with the MCA in a Spec. No. 582121900 via the LMS in Spec. No. 582140001. Refer to the
LMS documentation for further information.
♦ LMS Gateway Software Option allows the LMS to emulate a “dumb” RS-232 asynchronous terminal
interface. Specifically, List 64 enables user input through either a local or remote LMS port to be directed
to a DGU connected to the LMS Gateway port. Refer to the LMS documentation for further information.
Restrictions
Operation of Energy Management is disabled with this option installed.
The Gateway port is provided via the port located on the front of the LMS CPU circuit card installed in the
Spec. No. 582140001 Primary Bay.
Ordering Notes
1) Order as required.
Home