Application Guide

SAG582140001 System Application Guide
Issue AN, June 4, 2014 Spec. No. 582140001 (Model 801
NLDB, 801NLEB, 801NL-B)
Page 16 of 115
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Ordering Notes
1) Order distribution fuse and/or circuit breaker devices as required per Distribution Devices in the
ACCESSORY DESCRIPTIONS section.
2) Order load distribution lugs as required per Load Distribution Wire Sizes and Lugs Selection (Distribution
Bay) in the ACCESSORY DESCRIPTIONS section.
3) Order “Distribution Bay DC Input” lugs as required per Distribution Bay DC Input Cable Sizes and Lugs
Selection in the ACCESSORY DESCRIPTIONS section.
4) Order “Distribution Bay Frame Grounding” lugs as required per Distribution Bay Frame Grounding Wire
Sizes and Lugs Selection in the ACCESSORY DESCRIPTIONS section.
5) Order one (1) “Twenty-Four (24) Position Bullet-Nose Circuit Breaker/Fuse Panel” per Distribution Bay as
required per List C.
6) If a different length MCA Network cable is required, order per Replacement/Additional MCA Network
Cables. Refer to the Installation Instructions (Section 6016) for Network cabling requirements.
7) Side cover panels are factory installed on one side of the bay. In installations where a Distribution Bay is
placed by itself, order (2) P/N 528633 side cover panels for the other side.
List 21: Rectifier Module, 208V Input
Features
♦ Model R48-5800L, Spec. No. 1R485800L, 100A / 48 volt rectifier module.
Restrictions
For use in List B bays only.
Ordering Notes
1) Order List 21 Rectifier Modules as required. Each Power Bay holds up to twenty-four (24) Rectifier
Modules.
List 22: Rectifier Module, 380/480V Input
Features
♦ Model R48-5800, Spec. No. 1R485800, 100A / 48 volt rectifier module.
Restrictions
For use in List A bays only.
Ordering Notes
1) Order List 22 Rectifier Modules as required. Each Power Bay holds up to twenty-four (24) Rectifier
Modules.
List 24: Rectifier Module, 380/480V Input
Features
♦ Model R48-5800e, Spec. No. 1R485800e, 100A / 48 volt rectifier module.
Restrictions
For use in List A bays only. Requires that the system Router software is version 2.5.0.0 or higher.
Ordering Notes
Order List 24 Rectifier Modules as required. Each Power Bay holds up to twenty-four (24) Rectifier Modules.
List 50: Optional LMS Main CPU Circuit Card (Primary Power Bay)
Features
♦ Provides the LMS Monitoring System.
♦ Refer to SAG586505000 for further information.
Home