Brochures and Data Sheets

2
Key Features
n
Modular design — simple
to install and operate; allows
incremental cost-effective
system growth
n
Single point adjustment — no
tools required to change settings
and make adjustments; MCA
controls up to 168 rectifiers
n
LMS1000 monitoring with a
single plug in card — includes
SNMP and Web interface
n
Remote access — options allow
users to view, control and interact
with the system using an Ethernet
(Telnet, web pages, SNMP or TL1),
modem or RS 232
n
Plug’n’play — add rectifiers
without changing the settings and
making adjustments; no system
interruption
n
High density — compact design
takes up less floor space; houses
(24) 5800 watt rectifiers per
bay, distribution bays are rated
for 6000 amps in continuous
operation.
n
Efficiency — industry leading
3-phase rectifier; 93% peak,
92.6% at full load
n
Cabled plant — offers unlimited
configuration options
n
PowerShare — allows the reuse
of existing equipment
with NetSure
™
801
n
Safety compliance — NEBS
Level 3 compliance (pending
3rd party testing); UL Listed
to UL subject 1801
Description
The modular NetSure
™
801 power system
with 5800 watt rectifiers provides up
to 16,800 amps of power for -48 volt
systems. The basic components of the
system include 2640 amp power bays
which house the rectifiers and MCA
chassis, and 6000 amp distribution
bays. The cabled architecture allows the
placement of the bays anywhere the user
desires without regard to any specific
order. This also makes it more user friendly
in applications where existing obstacles,
such as support columns, need to be
accommodated. The total plant size is
defined by the maximum capacity of the
Main Battery Termination Bars (MBTB).
The NetSure
™
801 power system contains
a powerful, microprocessor-based meter,
control and alarm system capable of
monitoring and controlling up to 168
rectifiers. The MCA provides a 4 line,
5,800 watt rectifiers from Emerson
Network Power provide up to 110 amps
each. With 24 units per bay, these
rectifiers provide up to a 2,640 amp
output in a 24.375" x 30" footprint.
40-character alphanumeric display, which
can be activated at the touch of a keypad.
Each rectifier bay can accommodate up
to 24 plug’n’play rectifiers, which are
controlled by the MCA. Additional bays can
be added as load requirements increase.
The NetSure
™
801 power system offers
6000 amp modular distribution bays.
Each bay can be configured with up to
70 positions of fuses and circuit breakers
from 1-800 amps. Multiple bays may be
used to support load levels in excess of
16,800 amps. Contact an Emerson
application expert at 1-800-800-1280.
Application
The NetSure™ 801 system is ideal for
wireline, wireless and data center applica-
tions such as switch sites, co-location,
MTSO and data processing centers.