Brochures and Data Sheets

NetSure
™
ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue AK, March 3, 2014)
Spec. No: 1M820BNA, 1M820DNA Code: UM1M820BNA
Model No: M820B, M820D Issue AK, March 3, 2014
45
Table 5
Full Alarm Name – WEB
(Abbreviated
Alarm Name - LCD)
Alarm Description Action to Correct
BTRM Temp High 2
(BTRM Temp High2)
Battery temperature (monitored by
the sensor set as BTRM) is higher
than the BTRM Temperature Alarm 2
threshold.
Check why temperature is high or
low.
BTRM Temp High 1
(BTRM Temp High1)
Battery temperature (monitored by
the sensor set as BTRM) is higher
than the BTRM Temperature Alarm 1
threshold.
BTRM Sensor Fault
(BTRM TempFault)
BTRM temperature sensor failure. Replace temperature sensor.
Li-Ion Battery Lost
(LiBatt Lost)
A Li-Ion Battery cannot be detected
by the Controller.
Check communications cables.
Clear the Li-Ion Battery Lost alarm.
1 Li-Ion Battery Disconnect
(1 LiBattDiscon)
One (1) Li-Ion Battery is
disconnected.
Check why the Li-Ion Battery
disconnected.
2+Li-Ion Battery Disconnect
(2+LiBattDiscon)
Two (2) or more Li-Ion Batteries are
disconnected.
Check why the Li-Ion Batteries
disconnected.
1 Li-Ion Battery No Reply
(1 LiBattNoReply)
One (1) Li-Ion Battery has lost
communications with the Controller.
Check communications cables.
Clear the Li-Ion Communication Fail
alarm.
2+Li-Ion Battery No Reply
(2+LiBattNoReply)
Two (2) or more Li-Ion Batteries have
lost communications with the
Controller.
Check communications cables.
Clear the Li-Ion Communication Fail
alarm.
Inventory Update In Process
(InventUpdating)
Li-Ion Battery inventory being
updated.
--
ABCL is active
(ABCL Active)
Active Battery Charge Current Limit is
active.
--
Battery Alarms
(Battery)
Battery Current Limit
Exceeded
(Ov Batt Cur Lmt)
Battery current limit point is
exceeded.
--
Battery Over Current
(Batt Over Curr)
Battery is in over current. --
Low Battery Capacity
(Low Batt Cap)
Battery has low capacity. Check the batteries.