Brochures and Data Sheets

NetSure
™
ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue AK, March 3, 2014)
Spec. No: 1M820BNA, 1M820DNA Code: UM1M820BNA
Model No: M820B, M820D Issue AK, March 3, 2014
31
Table 5
Full Alarm Name – WEB
(Abbreviated
Alarm Name - LCD)
Alarm Description Action to Correct
System Temp1 Not Used
(System T1 Not U)
Temperature sensor port #1 is not
used.
(Note: This alarm is not used at this
time.)
System Temp2 Not Used
(System T2 Not U)
Temperature sensor port #2 is not
used.
System Temp3 Not Used
(System T3 Not U)
Temperature sensor port #3 is not
used.
IB2 Temp1 Not Used
(IB2 T1 Not Used)
Temperature sensor port #1 (on IB2
Board) is empty.
--
IB2 Temp2 Not Used
(IB2 T2 Not Used)
Temperature sensor port #2 (on IB2
Board) is empty.
EIB Temp1 Not Used
(EIB T1 Not Used)
Temperature sensor port #1 (on EIB
Board) is empty.
--
EIB Temp2 Not Used
(EIB T2 Not Used)
Temperature sensor port #2 (on EIB
Board) is empty.
System Temp1
Sensor Fault
(System T1 Senso)
Temperature sensor #1 failure.
(Note: This alarm is not used at this
time.)
System Temp2
Sensor Fault
(System T2 Senso)
Temperature sensor #2 failure.
System Temp3
Sensor Fault
(System T3 Senso)
Temperature sensor #3 failure.
IB2 Temp1 Sensor Fault
(IB2 T1 Sensor F)
Temperature sensor #1 (connected to
IB2 Board) failure.
Replace temperature sensor.
IB2 Temp2 Sensor Fault
(IB2 T2 Sensor F)
Temperature sensor #2 (connected to
IB2 Board) failure.
EIB Temp1 Sensor Fault
(EIB T1 Sensor F)
Temperature sensor #1 (connected to
EIB Board) failure.
Replace temperature sensor.
EIB Temp2 Sensor Fault
(EIB T2 Sensor F)
Temperature sensor #2 (connected to
EIB Board) failure.
DHCP Failure
(DHCP Failure)
The DHCP function is enabled, but
effective IP address cannot be
acquired.
Verify DHCP IP address.