Brochures and Data Sheets

NetSure
™
ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue AK, March 3, 2014)
Spec. No: 1M820BNA, 1M820DNA Code: UM1M820BNA
Model No: M820B, M820D Issue AK, March 3, 2014
12
Passwords and Access Levels
• Users (for local and Web access to the ACU+ Controller) are set via the Web Interface.
Note that anyone can browse the ACU+ via the local keypad and display. A password is required to change settings.
Web access always requires a User Name and password to be entered to gain access.
• Users are configured with a User Name, password, and access level.
User Name:
Maximum 13 Characters (0-9, a-z, A-Z, _ ).
Password:
Maximum 13 Characters (0-9, a-z, A-Z, _ ).
Once a password is entered, it remains in effect for a preset time period to allow navigating between menus without re-entering
the password.
Access Level:
Refer to the following table.
A User has access to his/her level menus, plus all menus of the lesser access levels.
Access Level
(Authority Level)
Default User Name
and Password
Authority
Level A (Browser) none set The User can only read (browse) information in the menus.
Level B (Operator) none set
The User has access to the system "Control" menus and the
“Operating State” (Auto/Manual).
Level C (Engineer) none set
The User has access to the system "Setting" menus and can
download the configuration package.
Level D (Administrator) admin, 1
The User has full access to all menus; including update the OS
application and modifying, adding, and deleting Users.