Brochures and Data Sheets

NetSure
™
ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue AK, March 3, 2014)
Spec. No: 1M820BNA, 1M820DNA Code: UM1M820BNA
Model No: M820B, M820D Issue AK, March 3, 2014
153
Table 6
Ident Group Controller Ident Group
Traps Alarm Traps Info
--
The SNMP agent can send the active alarms to the specified NMS and the User
can define the lowest severity of the NMS accepted alarms.
--
In Table 6, R means OID is read-only (GET), and R/W means OID can be read and modified (GET/SET).
Accessing the Controller through an NMS
Apply Administrative Authority
In order to use the NMS to manage the devices connected to the Controller, the administrative authority needs to be applied for the
NMS, that is, add the NMS information to the access list of SNMP agent.
Add NMS through Web Browser
Refer to “NMSV2 (Network Management System) Configuration Sub-Menu (versions 1 and 2)” on page 125 and “NMSV3 (Network
Management System) Configuration Sub-Menu (version 3)” on page 126 for the method of adding NMS.