Brochures and Data Sheets

NetSure
™
ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue AK, March 3, 2014)
Spec. No: 1M820BNA, 1M820DNA Code: UM1M820BNA
Model No: M820B, M820D Issue AK, March 3, 2014
150
Parameter Setting in SNMP Manager
MIB Installation
Installation
The Controller’s MIB is named "Netsure_ESNA.mib". Contact your
Emerson representative for the location on the Web to download
the MIB file.
Use the MIB loading function of the NMS to load the MIB database.
Refer to the User Manual provided with the NMS for the detailed
loading method.
Contents of the Controller’s MIB
The contents of the MIB supported by the Controller’s SNMP agent
and the OID are listed in Table 6. For the details, refer to the MIB
file named "Netsure_ESNA.mib".
Table 6. Contents of the Controller’s MIB
Table 6
Ident Group Controller Ident Group
identManufacturer The name of the equipment manufacturer. R
identModel The manufacturers model designation of the power system. R
identControllerFirmwareVersion The firmware (software) version of the Controller. R
identName The name of the power plant. This object should be set by the administrator. R/W
The permitted User to access the agent.
The get/set data security level
(NoAuthNoPriv, AuthNoPriv, or
AuthPriv).
The private DES password used to
encrypt the data.
The authorization MD5 password
used to encrypt the digital
signature.