Brochures and Data Sheets

NetSure
™
ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue AK, March 3, 2014)
Spec. No: 1M820BNA, 1M820DNA Code: UM1M820BNA
Model No: M820B, M820D Issue AK, March 3, 2014
136
Retrieve ‘SettingParam.run’ File Sub-Menu
See also “Backing Up the ACU+ Configuration” on page 26.
A file, named “SettingParam.run”, is automatically created by the Controller whenever a User (or the factory at the time of shipment)
makes changes to any parameter settings via the LCD or WEB interface.
Click on the “Retrieve File” button to save the file named "SettingParam.run" to your hard drive.
Note:
Ensure Internet Explorer security settings are set to enable a file to be copied to your computer.
To aid in file management, you may change the name of the “SettingParam.run” file. The new name can use alpha and numeric
characters preceding the original “SettingParam.run” name (the end of the new file name
must
always be “SettingParam.run”; for
example, an acceptable filename would be “seville4SettingParam.run”).