Brochures and Data Sheets

NetSure
™
ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue AK, March 3, 2014)
Spec. No: 1M820BNA, 1M820DNA Code: UM1M820BNA
Model No: M820B, M820D Issue AK, March 3, 2014
135
The following window opens.
WARNING! Never navigate from this web page without first clicking on "Start Controller". If you do, you will not have web
access. A manual system reset is required to restore web access.
• To download a configuration package, application ("ALL") package, or a "SettingParam.run" file to the controller; click the
"Browse…." button and navigate to the folder where the file to download is located. Select the file to be downloaded and then
click the "Download" button. Click "Start Controller" to restart the Controller with the downloaded file installed.
• To upload a file to your computer, select "Configuration Package" or "Language Package" from the "File in Controller" drop-down
list box, and click on the "Upload" button to save the file to your computer. Click "Start Controller" to restart the Controller.
Note:
Ensure Internet Explorer security settings are set to enable a file to be copied to your computer.
Note:
A Configuration Package is a package of files containing all the default parameter settings and any User changes to alarm severity levels,
relay assignments, signal names, and PLC expressions.
Note:
A Language Package is a package of files containing all the default names of the parameters in two languages. Typically these would be
in English and Chinese. The language package cannot be changed by the User. Consult Emerson if a different language package is
required.
Note:
A file named “SettingParam.run” is automatically created/appended by the Controller whenever a User (or the factory at the time of
shipment) makes changes to any parameter settings via the LCD or WEB interface.
Warning