Brochures and Data Sheets

NetSure
™
ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue AK, March 3, 2014)
Spec. No: 1M820BNA, 1M820DNA Code: UM1M820BNA
Model No: M820B, M820D Issue AK, March 3, 2014
98
"Batt Group" Parameter Settings:
•
EQ/FLT Control*:
Places the system in Equalize Charge or
Float Charge mode.
•
BattTestControl*:
Starts or stops a Battery Test.
•
Reset Batt Cap*:
Resets the battery capacity calculation.
•
Clr Bad Bat Alm*:
Clears a bad battery alarm.
•
Clr LiBatt Lost*:
Clears a Li-Ion battery lost alarm.
•
ClrLiBatComFail*:
Clears a Li-Ion battery communications
fail alarm
•
Clear AbnlCur Alm*:
Clears an abnormal current alarm.
•
Clear Cur Imb Alm*:
Clears a current imbalance alarm.
•
ClrBatTestFail*:
Clears a battery test fail alarm.
LVD
LVD UNIT MENU
Menu Navigation:
Main Menu / Manual / LVD / LVD Unit
Note: For WEB Interface; menu items are found under Device
Information / LVD Group / LVD Unit / select the Control tab.
"LVD Unit" Parameter Settings:
•
LVD1 Control:
Temporarily connects or disconnects
LVD1. Setting returns to original when Controller is
returned to the Auto mode.
•
LVD2 Control:
Temporarily connects or disconnects
LVD2. Setting returns to original when Controller is
returned to the Auto mode.
EIB
EIB 1 MENU
Menu Navigation:
Main Menu / Manual / EIB / EIB1
Note: For WEB Interface; menu items are found under Device
Information / EIB Group / EIB 1 / select the Control tab.
"EIB 1" Parameter Settings:
(EIB1 refers to the first Extended
Interface Board (EIB) in the system.))
•
Relay Output 9 through 13:
Temporarily sets the relay to
active or not active. Setting returns to original when
Controller is returned to the Auto mode.
Converter
ALL CONV CTRL MENU
Menu Navigation:
Main Menu / Manual / Converter / All Conv Ctrl
Note: For WEB Interface; menu items are found under Device
Information / Converter Group / select the Control tab.
"All Conv Ctrl" Parameter Settings:
•
Converter Trim:
Temporarily sets the output voltage for
all converters. Setting reverts to original when Controller
is returned to the Auto mode.
•
DC On/Off Ctrl:
Temporarily turns the DC output on or off
for all converters. Setting returns to original when
Controller is returned to the Auto mode.
•
Conv LED Control:
Temporarily sets whether or not a
converter’s local power indicator blinks when the
Controller is communicating with the converter. Setting
returns to original when Controller is returned to the
Auto mode.
•
Fan Speed Ctrl:
Temporarily sets the fan speed for all
converters. Setting returns to original when Controller is
returned to the Auto mode.
•
Confirm ID *:
Confirms the position for all converters.
•
Clear Conv Lost*:
Clears a converter lost alarm.
•
Clear Comm Fail*:
Clears a converter communication fail
alarm.
•
ClrAllCommFail*:
Clears all converter communication fail
alarms.
CONV #1 MENU
Menu Navigation:
Main Menu / Manual / Converter / CONV 1
Note: For WEB Interface; menu items are found under Device
Information / Converter Group / Converter #1 / select the Control
tab.
"CONV #1" Parameter Settings:
•
DC On/Off Ctrl:
Temporarily turns the converter’s DC
output on or off. Setting returns to original when
Controller is returned to the Auto mode.
•
Over Volt Reset:
Temporarily sets the converter’s over
voltage reset feature. Setting returns to original when
Controller is returned to the Auto mode.
•
LED Control:
Temporarily sets whether or not the
converter’s local power indicator blinks when the
Controller is communicating with the converter. Setting
returns to original when Controller is returned to the
Auto mode.
SMTemp
SMTEMP GROUP MENU
Menu Navigation:
Main Menu / Manual / SMTemp / SMTemp Group
Note: For WEB Interface; menu items are found under Device
Information / SM Temp Group / Control Tab.