Brochures and Data Sheets

NetSure
™
ACU+ Controller (Advanced Control Unit Plus)
User Instructions, UM1M820BNA (Issue AK, March 3, 2014)
Spec. No: 1M820BNA, 1M820DNA Code: UM1M820BNA
Model No: M820B, M820D Issue AK, March 3, 2014
97
Man/Auto Set
MAN/AUTO SET MENU
Menu Navigation:
Main Menu / Manual / "Man/Auto Set"
Note: For WEB Interface; menu items are found under Quick
Settings / “Auto/Manual Setting”.
"Man/Auto Set" Parameter Settings:
•
Auto/Man State*
•
Auto:
The Controller automatically controls the
power system.
•
Manual:
A User can manually change certain power
system control settings via the following menus.
(See Note above.) This provides a convenient means
of making temporary adjustment changes for
testing purposes.
Power System
POWER SYSTEM MENU
Menu Navigation:
Main Menu / Manual / Power System
Note: For WEB Interface; menu items are found under Device
Information / Power System / select the Control tab.
"Power System" Parameter Settings:
•
Relay Output 1 through 8:
Temporarily sets the relay to
active or not active. Setting reverts to original when
Controller is returned to the Auto mode.
•
Clr MtncRunTime*:
The only selection for "Clear
Maintenance Run Time" is Yes. Once Yes is selected and
confirmed, the Power System’s Maintenance Run Time
log is cleared.
Rectifier
ALL RECT CTRL MENU
Menu Navigation:
Main Menu / Manual / Rectifier / All Rect Ctrl
Note: For WEB Interface; menu items are found under Device
Information / Rectifier Group / select the Control tab.
"All Rect Ctrl" Parameter Settings:
•
Rectifier Trim:
Temporarily sets the output voltage for all
rectifiers. Voltage can be increased or decreased from
the existing Float Charge or Equalize Charge setting,
depending which mode the Controller was in when set to
"Manual". Setting reverts to original when Controller is
returned to the Auto mode.
•
DC On/Off Ctrl:
Temporarily turns the DC output on or off
for all rectifiers. Setting returns to original when
Controller is returned to the Auto mode.
•
AC On/Off Ctrl:
Temporarily turns the AC input on or off
for all rectifiers. Setting returns to original when
Controller is returned to the Auto mode.
•
Rect LED Ctrl:
Temporarily sets whether or not a
rectifier’s local power indicator blinks when the
Controller is communicating with the rectifier. Setting
returns to original when Controller is returned to the
Auto mode.
•
Fan Speed Ctrl:
Temporarily sets the fan speed for all
rectifiers. Setting returns to original when Controller is
returned to the Auto mode.
•
Confirm ID/PH*:
Confirms the position and input phase
for all rectifiers.
•
Clear Rect Lost*:
Clears a rectifier lost alarm.
•
Reset Cycle Alm*:
Clears a rectifier oscillator alarm.
•
Clear Comm Fail*:
Clears a rectifier communication fail
alarm.
RECT #1 MENU
Menu Navigation:
Main Menu / Manual / Rectifier / Rect #1
Note: For WEB Interface; menu items are found under Device
Information / Rectifier Group / Rectifier #1 / select the Control tab.
"Rect #1" Parameter Settings:
•
DC On/Off Ctrl:
Temporarily turns the rectifier’s DC
output on or off. Setting returns to original when
Controller is returned to the Auto mode.
•
AC On/Off Ctrl:
Temporarily turns the rectifier’s AC input
on or off. Setting returns to original when Controller is
returned to the Auto mode.
•
LED Control:
Temporarily sets whether or not the
rectifier’s local power indicator blinks when the
Controller is communicating with the rectifier. Setting
returns to original when Controller is returned to the
Auto mode.
•
Rectifier Reset*:
Resets the rectifier.
Batt Group
BATT GROUP MENU
Menu Navigation:
Main Menu / Manual / Batt Group
Note: For WEB Interface; menu items are found under Device
Information / Battery Group / select the Control tab.