Brochures and Data Sheets

SAG582127100 System Application Guide
Issue AA, May 7, 2013 Spec. No. 582127100 (Model 722NBBB)
Page 6 of 26
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
5) Order one (1) ACU+ controller, P/N 1M820DNA.
6) Order output lugs and lug hardware kits as required per “Standard Crimp Lugs and Lug Hardware Kits” on
page 13. See also Table 7.
List 11: Expansion Rectifier Module Mounting Shelf Interface Components
Features
Provides DC output lug landing busbar assemblies for one expansion rectifier module mounting shelf and
busbar interconnecting links. Provides shelf rack mounting hardware. The expansion rectifier module
mounting shelf(s) must be ordered separately. Refer to Power Data Sheet PD588705000.
Ordering Notes
1) For a shipped loose system, order one (1) to four (4) List 11 per system. In systems using List 20 and
List 21 interface components, if a fourth expansion rectifier module mounting shelf is required, also order
a List 11 for the fourth expansion rectifier module mounting shelf.
2) Order one (1) to four (4) expansion rectifier module mounting shelf(s) per PD588705000 (choices are
58870500051, 558870500052, or 58870500053).
3) Order up to six (6) rectifier modules per expansion rectifier module mounting shelf, P/N 1R483500E.
4) Order a rectifier module mounting position blank cover panel, P/N 21140440, for each empty rectifier
module mounting position in the system, as desired.
5) Order output lugs and lug hardware kits as required per “Standard Crimp Lugs and Lug Hardware Kits” on
page 13. See also Table 7.
List 20: Main Rectifier Module Mounting Shelf to Expansion Rectifier Module Mounting Shelf Interface
Components
Features
Provides mounting angles and DC output lug landing busbar assemblies which span between the main
rectifier module mounting shelf and one (1) expansion rectifier module mounting shelf. Provides shelf
rack mounting hardware. The main and expansion rectifier module mounting shelf must be ordered
separately. Refer to Power Data Sheet PD588705000.
Note: List 20 provides the interface components for a two-shelf (main and expansion) arrangement to
eliminate the linking busbars between the first two shelves. One set of output busbars (one
busbar per polarity) is provided for the two shelf arrangement.
The main rectifier module mounting shelf provides a mounting slot for the ACU+ controller. Also provided
in the main rectifier module mounting shelf is the system interface board which provides customer
connections for two (2) external battery fuse alarm inputs, four (4) external load fuse alarm inputs, one (1)
load shunt input, one (1) battery shunt input, one (1) LVD driver output, one (1) LVD sense input, and
RS-485 port. Two temperature inputs are provided directly to the internal system interface board. Also
provided in the main rectifier module mounting shelf is the IB2 ACU+ interface board which provides eight
(8) programmable form-C relay outputs, eight (8) programmable binary inputs, and two (2) temperature
inputs.
Ordering Notes
1) For a relay rack or rail mounted system consisting at the minimum of one (1) main rectifier module
mounting shelf and one (1) expansion rectifier module mounting shelf, order one (1) List 20 per system.
2) Order the main rectifier module mounting shelf per PD588705000 (choices are 58870500061,
558870500062, or 58870500063).
3) Order an expansion rectifier module mounting shelf per PD588705000 (choices are 58870500051,
558870500052, or 58870500053).
4) Order up to five (5) rectifier modules for the main rectifier module mounting shelf, P/N 1R483500E. Order
up to six (6) rectifier modules for the expansion rectifier module mounting shelf, P/N 1R483500E.
5) Order a rectifier module mounting position blank cover panel, P/N 21140440, for each empty rectifier
module mounting position in the system, as desired.
Home