Ordering Guides

System Application Guide SAG582136600
Spec. No. 582136600 (Model 211
NGFB) Issue AU, February 21, 2014
Page 87 of 105
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Home
Input Battery Wiring (Lists BF, LF, NF, BC, LC, and NC installed in a List 1 or 5, List 5 shown)
and CO Ground Wiring (Lists BF, LF, and NF installed in a List 1 or 5, List 5 shown)
List NF Distribution
Unit shown. List BF,
LF, BC, LC, and NC similar.
Front
Battery, Battery Return,
and CO Ground Leads
Enter Here
Distribution
Unit
List 65 provides 3' long, 2 AWG, battery cables
terminated on one end with lugs to connect to
the input battery landings and on the other end
with an Anderson connector.
List 66 provides 12' long, 2 AWG, battery cables
terminated on one end in an Anderson connector
and left unterminated at the remaining end for
connection of battery lugs.
Battery: 1/4-20 studs (w/hardware)
on 5/8" centers for installation
of customer provided two hole lugs.
CO Ground: 10-32 studs (w/hardware)
on 5/8" centers for installation
of customer provided two hole lugs.
OBSERVE PROPER
POLARITY WHEN
MAKING BATTERY
CONNECTIONS
Right Side
-48 Battery Leads
Battery Return Leads
CO Ground Lead
CO Ground Lead
List BF, LF, and NF
Distribution Unit
List BC, LC, and NC
Distribution Unit
-48 Battery Leads
Battery Return Leads
Right Side