Ordering Guides

System Application Guide SAG582136600
Spec. No. 582136600 (Model 211
NGFB) Issue AU, February 21, 2014
Page 59 of 105
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
NetSure™ 211BC Battery Cabinet (Spec. No. 554631)
Features
♦ The NetSure™ 211BC Battery Cabinet is rated at 30
amperes, and can be mounted in a 19” or 23” nominal relay
rack, or mounted to a suitable wall.
♦ The Battery Cabinet contains one (1) 40 ampere battery
disconnect circuit breaker.
♦ Battery circuit breaker alarm leads are provided to tie into the
power system’s alarm circuit.
♦ The Battery Cabinet is equipped with a battery cable
terminated in an Anderson connector.
♦ Cables to connect the batteries (as specified in the table
under Ordering Notes) into the Battery Cabinet provided.
♦ Battery Cabinets can be paralleled to provide greater reserve
time. Battery cabinets contain a second Anderson battery
connector for plugging one cabinet into another.
Ordering Notes
1) Order by Spec. No. 554631 as required.
2) Also order four (4) batteries per Battery Cabinet per the following table.
Battery
Manufacturer
Manufacturer
P/N
Emerson P/N Capacity Amp-Hours
(8Hr rate)
Weight (lb)
per Battery
GNB M12V40F 241173815 40 39.00
Note: When wall mounted, a battery cabinet frame grounding landing point adapter, P/N 556872, is
provided. This adapter installs in the relay rack mounting bracket holes located on either side of the
cabinet.
Attach Frame Ground Landing
Point Adapter to Cabinet
Frame Grounding Point
(1/4-20 Studs on 5/8” Centers)
Frame Ground Landing
Point Adapter P/N 556872
Home