Ordering Guides

System Application Guide SAG582136600
Spec. No. 582136600 (Model 211
NGFB) Issue AU, February 21, 2014
Page 57 of 105
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
NetSure™ 211BC Battery Cabinet (Spec. No. 545534)
Features
♦ The NetSure™ 211BC Battery Cabinet is rated at 30
amperes, and can be mounted in a 19” or 23” nominal
relay rack, or mounted to a suitable wall.
♦ The Battery Cabinet contains one (1) 40 ampere battery
disconnect circuit breaker.
♦ Battery circuit breaker alarm leads are provided to tie into
the power system’s alarm circuit.
♦ The Battery Cabinet is equipped with a battery cable
terminated in an Anderson connector.
♦ Cables to connect the batteries (as specified in the table
under Ordering Notes) into the Battery Cabinet provided.
♦ Battery Cabinets can be paralleled to provide greater
reserve time. Battery cabinets contain a second
Anderson battery connector for plugging one cabinet into
another.
Ordering Notes
1) Order by Spec. No. 545534 as required.
2) Also order four (4) batteries per Battery Cabinet per the
following table.
Battery
Manufacturer
Manufacturer
P/N
Emerson P/N Capacity Amp-Hours
(8Hr rate)
Weight (lb)
per Battery
Enersys SBS B10 140553 38 28.20
C&D / Dynasty TEL[phone].70
3) When wall mounted, also order a battery cabinet frame grounding landing point adapter P/N 556872.
This adapter installs in the relay rack mounting bracket holes located on either side of the cabinet.
Attach Fr
ame Ground Land
ing
Point A
dapter to Cabine
t
Fra
me G
roun
din
g Po
int
(
1/4-
20 S
tud
s on
5/8”
Centers)
F
rame Groun
d Landing
P
oint Adap
ter P/N 5
56872
Home