Ordering Guides

System Application Guide SAG582136600
Spec. No. 582136600 (Model 211
NGFB) Issue AU, February 21, 2014
Page 41 of 105
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Home
ACCESSORY DESCRIPTIONS
Relay Racks
Features
♦ The following relay racks are available.
Restrictions
Customer must mount Power/Distribution Shelf in relay rack. If battery trays are ordered, they are factory
mounted in the relay rack.
Ordering Notes
1) Order from relay racks listed in Table 1.
Part
Number
Size
Available Mounting
Positions (1RU = 1-3/4”)
Notes
23” Relay Racks
543156
51-3/8” H x 23” W
28RU
Welded
543161 6’0” H x 23” W 37RU Welded
543160 7’0” H x 23” W 45RU
Seismic
(Note 1)
543162 7’0” H x 23” W 45RU Welded
543163
7’6” H x 23” W
48RU
Welded
543164
8’0” H x 23” W
51RU
Welded
19” Relay Racks
525003 51-3/8” H x 19” W 28RU Welded
534653 6’0" H x 19” W 37RU
Seismic
(Note 1)
524961 6’0” H x 19” W 37RU Welded
534654 6’6” H x 19” W 41RU
Seismic
(Note 1)
534651 6’6” H x 19” W 41RU Welded
528183 7’0” H x 19” W 45RU
Seismic
(Note 1)
524988 7’0” H x 19”W 45RU Welded
524963 7’6” H x 19” W 48RU Welded
534652
8’0" H x 19” W
51RU
Welded
Note 1: Complies with Bellcore Seismic Zone 4 requirements.
Table 1
Available Relay Racks