Ordering Guides

System Application Guide SAG582136600
Spec. No. 582136600 (Model 211
NGFB) Issue AU, February 21, 2014
Page 25 of 105
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Home
List 94: Battery Tray for 19” Relay Rack
Features
♦ Provides one battery tray that mounts four (4) 12V front terminal
Valve Regulated Lead Acid (VRLA) batteries. Batteries are
configured as one (1) 48V string.
♦ Accepts various VRLA batteries. See Ordering Notes below.
♦ See Overall Dimensions - 19” Battery Tray under PHYSICAL SIZE
INFORMATION for battery tray dimensions and typical
arrangement. Note that three battery trays are available to
accommodate the various size batteries listed in the Ordering
Notes tables.
♦ Trays can be ordered with or without battery disconnect circuit
breakers. When circuit breakers are ordered, one is provided in
the -48V lead of each battery string (1 circuit breaker per tray).
♦ Battery cables are available terminated at the power system end in
an Anderson connector. Battery lugs are available for the remaining
end.
Restrictions
For 19” relay racks only.
Maximum number of List 94’s per rack is three (3).
A single List 94 must mount at bottom of rack. Multiple List 94’s must
mount starting at bottom of rack and working upward.
Ordering Notes
1) Order multiples of List 94 for more than one (1) battery tray. See
Restrictions above.
2) Order one (1) or more P/N 362736700 Cable Bracket(s) as required.
3) Order batteries separately. Tables F, G, H and I list batteries
recommended for use with List 94.
4) Specify rack spacing of 6U (10.5”), 7U (12.25”), or 8U (14”) between
trays and above top tray as required for battery clearance. See
Tables F, G, H and I.
5) Battery lugs are provided, as specified from Table J.
6) Specify with or without battery disconnect circuit breakers.
Note: All List 94 trays in a rack will be furnished with or without battery disconnect circuit breakers as
specified for the first tray ordered.
7) If ordering List 94 with circuit breakers, order one (1) circuit breaker per List 94 from Table K.
8) If ordering List 94 with circuit breakers, specify breaker mounting on left side of tray, right side of tray, or
remote mounting. Circuit breaker mounting kits shown in the Table K will be installed. Kit numbers are
provided for reference only.
9) If ordering List 94 with circuit breakers, order Alarm Jumper P/N 524384 for each system to connect the
alarm terminal of up to three (3) battery disconnect circuit breakers.