Installation Manual

Emerson Network Power
Buried Distribution Products
631-200-108
Version B, March 18, 2013
Page 2 of 14 Proprietary Information Outside Plant Equipment
2.2 Construction
The CoolPed 3.0 (CPED1844) DSLAM enclosure is constructed with mill-galvanized steel
and has a durable painted finish. It is a round cornered, rectangular design, ventilation in the
doors and cap provide optimal ventilation for up to four weather hardened DSLAM's. To ease
installation, the lower cover can be removed by loosening the hex head bolts inside the base
and lifting the cover up.
2.3 Doors and Locking Mechanisms
There are doors on the front and back of the enclosure, equipped with wind latches that secure
the doors when open.
Each pair of doors is secured by a latch at the top and bottom of the doors. A 216-type tool is
required to open the doors, and padlock hasps provide the option for additional security. The
doors can be removed by opening them and lifting them off the hinges.
2.4 Mounting
The enclosure can either be pad mounted or direct buried (stake mounted). For ultimate
stability, pad mounting is recommended. For direct buried installation, two (2) mounting stakes
and two (2) stabilizer bars are included.
see DETAIL A
DETAIL
A
Fig. 2 : The CoolPed 3.0 (CPED 1844) DSLAM Enclosure