Installation Manual

Outside Plant Equipment Proprietary Information Page 1 of 14
Emerson Network Power
Buried Distribution Products
631-200-108
Version B, March 18, 2013
NETREACH
TM
C O O L P E D 3 . 0
PASSIVE DSLAM ENCLOSURE
DESCRIPTION AND INSTALLATION
1. ABOUT THIS DOCUMENT
1.1 Purpose
This practice provides a description of the CoolPed 3.0 (CPED1844) DSLAM Enclosure as
well as installation instructions.
1.2 Reason for Reissue
Whenever this practice is reissued, the reason for reissue will be stated in this paragraph.
1.3 Additional Information
The information contained in this practice is subject to change without notice and may not be
suitable for all applications. Always follow local practices and procedures as applicable for
procedures not specifically described in this practice.
2. DESCRIPTION
2.1 Application
The CoolPed 3.0 (CPED1844)
DSLAM enclosure (shown in Fig. 1)
houses environmentally-hardened
electronics. It can accommodate up to
four customer-supplied Digital
Subscriber Line Access Multiplexers
(DSLAMs), two in the front and two in
the back, an optional Emerson AC
Power Kit (ACPOWKIT F1007112),
and various accessories as may be
required by your specific application.
Generous ventilation in the enclosure
doors and cap provide the necessary air
flow for multiple DSLAM’s.
Fig. 1 : The CoolPed DSLAM Enclosure