Installation Manual

Emerson Network Power
Buried Distribution Products
631-200-063
Version A, May 2005
Outside Plant Equipment Proprietary Information Page 5 of 8
Step 4: Connect the DSLAM power cables (or other AC power cables) to the
Liquid Tight connectors per local practices. (See Fig. 8.)
Step 5: Use a a 216-type tool and the four cup SEMS bolts to mount the junction
box on the lower mounting rails of the CoolPed or CoolPedPLUS Splice
Cabinet, in the center position (as shown in Fig. 9).
Fig. 7 : Attaching a Liquid Tight Connector
Fig. 8 : Connecting a DSLAM
Power Cable to the Junction Box
lower mounting rails
of CoolPed or
CoolPedPLUS
Splice Cabinet
Fig. 9 : Mounting the Junction Box in the CoolPed or CoolPedPLUS Splice Cabinet