Installation Manual

Emerson Network Power
Buried Distribution Products
631-200-063
Version A, May 2005
Page 4 of 8 Proprietary Information Outside Plant Equipment
Step 2: As required, remove knockouts for the DSLAM power cables or other AC
power applications (shown in Fig. 6).
ALERT
Do not remove knockouts that you will not be using.
Step 3: On the bottom of the junction box, attach one of the supplied Liquid
Tight connectors to each of the smaller holes that you will be using for
DSLAM power cables or other AC power applications (as shown in
Fig. 7).
knockouts for
DSLAM power
cables
knockouts for
DSLAM power
cables
knockout for
incoming AC
power conduit
knockout for
incoming AC
power conduit
knockouts for
DSLAM power
cables
knockouts for
DSLAM power
cables
Fig. 6 : Knockouts