User`s guide

Copyright © 2004 EIM COMPANY, INC. • 13840 PIKE ROAD • MISSOURI CITY, TX. 77489
Page 114
Controlinc 1746-C (Version 5.21) Network Master Users Guide (2004-11-18)
Reg[1101] – Log Archive Archive Motor Starts Log (Word 2)
Reg[1102] – Log Archive Archive Motor Starts Log (Word 3)
Reg[1103] – Log Archive Archive Valve Strokes Log (Word 1)
Reg[1104] – Log Archive Archive Valve Strokes Log (Word 2)
Reg[1105] – Log Archive Archive Valve Strokes Log (Word 3)
Reg[1106] – Log Archive Archive Motor Run-time – Min Archive Motor Run-Time – Sec
Reg[1107] – Log Archive Archive Motor Run-time – Hours
Reg[1108] – Real-Time Data Current Valve Position (0.0% -100.0% in 0.1% increments)
Reg[1109] – Real-Time Data Current Valve Position (0 - 4095)
Reg[1110] – Real-Time Data Current Torque (0.0% -100.0% in 0.1% increments)
Reg[1111] – Real-Time Data Current Torque (0 - 4095)
Reg[1112] – Real-Time Data Analog Input #1 (0 - 4095)
Reg[1113] – Real-Time Data Analog Input #2 (0 - 4095)
Reg[1114] – Real-Time Data Analog Output #1 (0 - 4095)
Reg[1115] – Real-Time Data Analog Output #2 (0 - 4095)
Reg[1116] – Real-Time Data Position Control Setpoint (0 - 4095)
Reg[1117] – Real-Time Data Position Control Setpoint (0.0% -100.0% in 0.1% increments)
Reg[1118] – User (Field) Setup Analog Input #1 ZERO Calibration Data
Reg[1119] – User (Field) Setup Analog Input #1 SPAN Calibration Data
Reg[1120] – User (Field) Setup Analog Input #2 ZERO Calibration Data
Reg[1121] – User (Field) Setup Analog Input #2 SPAN Calibration Data
Reg[1122] – User (Field) Setup Analog Output #1 ZERO Calibration Data
Reg[1123] – User (Field) Setup Analog Output #1 SPAN Calibration Data
Reg[1124] – User (Field) Setup Analog Output #2 ZERO Calibration Data
Reg[1125] – User (Field) Setup Analog Output #2 SPAN Calibration Data
Reg[1126] – Factory Setup
Valve Travel Speed
(seconds if part-turn valve) or (RPM if multi-turn valve)
Reg[1127] - (RESERVED – NO-OP)
Reg[1128] – ID CCM Version ID – Mid Num CCM Version ID – High Num
Reg[1129] – ID CCM Compile Date – Char 0 CCM Version ID – Low Num
Reg[1130] – ID CCM Compile Date – Char 2 CCM Compile Date – Char 1
Reg[1131] – ID CCM Compile Date – Char 4 CCM Compile Date – Char 3
Reg[1132] – ID CCM Compile Date – Char 6 CCM Compile Date – Char 5
Reg[1133] – ID CCM Compile Date – Char 8 CCM Compile Date – Char 7
Reg[1134] – ID (RESERVED – NO-OP)
Reg[1135] – ID (RESERVED – NO-OP)
Reg[1136] – ID RDM1 Version ID – Mid Num RDM1 Version ID – High Num
Reg[1137] – ID RDM1 Compile Date – Char 0 RDM1 Version ID – Low Num
Reg[1138] – ID RDM1 Compile Date – Char 2 RDM1 Compile Date – Char 1
Reg[1139] – ID RDM1 Compile Date – Char 4 RDM1 Compile Date – Char 3
Reg[1140] – ID RDM1 Compile Date – Char 6 RDM1 Compile Date – Char 5
Reg[1141] – ID RDM1 Compile Date – Char 8 RDM1 Compile Date – Char 7
Reg[1142] – ID (RESERVED – NO-OP)
Reg[1143] – ID (RESERVED – NO-OP)
Reg[1144] – ID RDM2 Version ID – Mid Num RDM2 Version ID – High Num
Reg[1145] – ID RDM2 Compile Date – Char 0 RDM2 Version ID – Low Num
Reg[1146] – ID RDM2 Compile Date – Char 2 RDM2 Compile Date – Char 1
Reg[1147] – ID RDM2 Compile Date – Char 4 RDM2 Compile Date – Char 3
Reg[1148] – ID RDM2 Compile Date – Char 6 RDM2 Compile Date – Char 5
Reg[1149] – ID RDM2 Compile Date – Char 8 RDM2 Compile Date – Char 7
Reg[1150] – ID (RESERVED – NO-OP)
Reg[1151] – ID (RESERVED – NO-OP)
Reg[1152] – ID LDM Version ID – Mid Num LDM Version ID – High Num