Technical data

Pin Assignments
MVME6100 Single Board Computer Installation and Use (6806800D58E)
93
The default configuration for P2, C27-C30 are connected to PMC0_IO (53,55,57,59).
5.2.7 VMEbus P2 Connector (IPMC Mode)
The VME P2 connector is an 160-pin DIN. Row B of the P2 connector provides power to the
MVME6100 and to the upper eight VMEbus address lines and additional 16 VMEbus data lines.
The pin assignments for the P2 connector are as follows:
28 GND PMC0_5
6 (J14-
56)
VD29 PMC0_55
(J14-55)/RXB
PMC1_42
(J24-42)
28
29 PMC1_44 (J30 D9-
C9) or
P2_IO_GLAN1_M
DIO_3- (J30 B9-C9)
PMC0_5
8 (J14-
58)
VD30 PMC0_57
(J14-57)/RTSB
PMC1_43
(J24-43)
29
30 GND PMC0_6
0
(J14-60)
VD31 PMC0_59
(J14-59)/CTSB
PMC1_45
(J24-45)
30
31 PMC1_46 (J30
D10-C10) or
P2_IO_GLAN1_M
DIO_3+ (J30 B10-
C10)
PMC0_6
2 (J14-
62)
GND PMC0_61
(J14-61)
GND 31
32 GND PMC0_6
4 (J14-
64)
+5V PMC0_63
(J14-63)
VPC 32
Table 5-13 VMEbus P2 Connector Pin Assignments (PMC Mode) (continued)
ROW Z ROW A ROW B ROW C ROW D
Table 5-14 VME P2 Connector Pinouts with IPMC712
Pin Row Z Row A Row B Row C Row D
1 PMC2_2 DB0# +5V RD- PMC2_1 (J24-1)
2 GND DB1# GND RD+ PMC2_3 (J24-3)
3 PMC2_5 DB2# N/C TD- PMC2_4 (J24-4)
4 GND DB3# VA24 TD+ PMC2_6 (J24-6)