Technical data
Pin Assignments
MVME6100 Single Board Computer Installation and Use (6806800D58E)
88
5.2.4 COM1 Connector (J19)
A standard RJ-45 connector located on the front panel of the MVME6100 provides the interface
to the asynchronous serial debug port. The pin assignments for this connector are as follows:
47 Not Used Not Used 48
49 Not Used Not Used 50
51 Not Used Not Used 52
53 Not Used Not Used 54
55 Not Used Not Used 56
57 Not Used Not Used 58
59 Not Used Not Used 60
61 Not Used Not Used 62
63 Not Used Not Used 64
Table 5-10 PMC Slot 2 Connector (J24) Pin Assignments (continued)
Pin Signal Signal Pin
Table 5-11 COM1 Connector (J19) Pin Assignments
Pin Signal
1DCD
2RTS
3GNDC
4TX
5RX
6GNDC
7CTS
8DTR