Technical data

Functional Description

MVME6100 Single Board Computer Installation and Use (6806800D58E)

On-board Peripheral Support — Dual 10/100/1000 Ethernet ports routed to front panel RJ-45

connectors, one optionally routed to P2 backplane

— Two asynchronous serial ports provided by an ST16C554D; one

serial port is routed to a front panel RJ-45 connector and the second

serial port is routed to an on-board header (J29, as factory default

build configuration).

PCI/PMC — Two 32/64-bit PMC slots with front-panel I/O plus P2 rear I/O as

specified by IEEE P1386

— 33/66 MHz PCI or 66/100 MHz PCI-X

VME Interface — Tsi148 VME 2eSST ASIC provides:

z Eight programmable VMEbus map decoders

z A16, A24, A32, and A64 address

z 8-bit, 16-bit, and 32-bit single cycle data transfers

z 8-bit, 16-bit, 32-bit, and 64-bit block transfers

z Supports SCT, BLT, MBLT, 2eVME, and 2eSST protocols

z 8 entry command and 4KB data write post buffer

z 4KB read ahead buffer

PMCspan Support — One PMCspan slot

— Supports 33/66 MHz, 32/64-bit PCI bus

— Access through PCI6520 bridge to PMCspan

Form Factor — Standard 6U VME

Miscellaneous — Combined reset and abort switch

— Status LEDs

— 8-bit software-readable switch (S1)

— VME geographical address switch (S3)

— Boundary Scan header (J8)

— CPU RISCWatch COP header (J42)

Table 4-1 MVME6100 Features Summary (continued)

Feature Description