Technical data

Hardware Preparation and Installation

MVME6100 Single Board Computer Installation and Use (6806800D58E)

Figure 1-1 on page 20 shows the locations of the various connectors while Table 1-5 lists them

for you. Refer to Chapter 5, Pin Assignments for the pin assignments of the connectors listed

below.

1.7 Completing the Installation

Verify that hardware is installed and the power/peripheral cables connected are appropriate

for your system configuration.

Replace the chassis or system cover, reconnect the system to the AC or DC power source, and

turn the equipment power on.

Table 1-5 MVME6100 Connectors

Connector Function

J3 IPMC761/712 connector

J4 PMC expansion connector

J9, J93 Gigabit Ethernet connectors

J11, J12, J13, J14 PCI mezzanine card (PMC) slot 1 connector

J19 COM1 connector

J21, J22, J23, J24 PCI mezzanine card (PMC) slot 2 connector

J29 COM2 planar connector

P1, P2 VME rear panel connectors