Technical data

Hardware Preparation and Installation
MVME6100 Single Board Computer Installation and Use (6806800D58E)
17
1.3.1 Overview of Startup Procedures
The following table lists the things you will need to do before you can use this board and tells
where to find the information you need to perform each step. Be sure to read this entire
chapter, including all Caution and Warning notes, before you begin.
1.3.2 Unpacking Guidelines
Unpack the equipment from the shipping carton. Refer to the packing list and verify that all
items are present. Save the packing material for storing and reshipping of equipment.
Table 1-1 Startup Overview
What you need to do... Refer to...
Unpack the hardware. Unpacking Guidelines on page 17
Configure the hardware by setting jumpers on the board. Configuring the Hardware on page 18
Install the MVME6100 board in a chassis. Installing the Blade on page 27
Connect any other equipment you will be using Connecting to Peripherals on page 27
Verify the hardware is installed. Completing the Installation on page 28