Technical data

MVME7616E Transition Module Installation and Use (6806800A43B)

Connector Pin Assignments Parallel I/O Port Connector (J4)

4.5 Parallel I/O Port Connector (J4)

The interface for the parallel port is a standard IEEE P1284-C, 36-pin connector, J4. The

functionality of each signal depends on the mode of operation of this bidirectional Parallel

Peripheral Interface. Refer to the IEEE P1284 D2.00 Standard for a complete description of

each signal function. The connector shield is tied to chassis ground.

The pin assignments and signal mnemonics for this connector are listed in Table 4-5.

13 SP4_P13 26 No Connect

Table 4-4 Serial Port 4 Pin Assignments (continued)

Pin Signal Pin Signal

Table 4-5 Parallel I/O Connector Pin Assignments

Pin Signal Signal Pin

1 PRBSY GND 19

2 PRSEL GND 20

3 PRACK_ GND 21

4 PRFAULT_ GND 22

5 PRPE GND 23

6 PRD0 GND 24

7 PRD1 GND 25

8 PRD2 GND 26

9 PRD3 GND 27

10 PRD4 GND 28

11 PRD5 GND 29

12 PRD6 GND 30

13 PRD7 GND 31

14 INPRIME_ GND 32

15 PRSTB_ GND 33

16 SELIN_ GND 34

17 AUTOFD_ GND 35

18 Pull-up No Connect 36