Technical data

P2 Adapter Boards General Information
MVME7616E Transition Module Installation and Use (6806800A43B)
15
The SIMs for the MVME761 are listed in the following table.
Additional SIMs may be released. Please see your Emerson representative for a complete list
of SIMS that are available for the MVME761-0x1.
1.5 P2 Adapter Boards
The P2 adapters route the asynchronous and synchronous port, printer port, and Ethernet
signals to the MVME761 transition module.
1.6 Three-row P2 Adapter (MVME761-001)
The P2 adapter for the MVME761-001 mounts onto a 3-row, 96-pin P2 backplane connector.
The 50-pin male connector, J2, carries the 8-bit SCSI signals from the host VMEmodules. To
run SCSI devices, you may install an additional transition module that is equipped with a SCSI
port, such as the MVME712B.
This P2 adapter, and the cable for connecting to the MVME761 transition module, can be
ordered separately as model MVME761P2-001.
Table 1-1 SIM Part Numbers
Interface Model Number Part Number
EIA-232-D DCE SIM232DCE5E 01-W3876B11A
EIA-232-D DTE SIM232DTE5E 01-W3877B11A
Figure 1-2 Three Row P2 Adapter
C
B
A
2
1
J1
J2
1933 9610
J3
2
1
1
64
63
50
49
++
R1
C1
U1
9
25
17
CR1
R2
C2
C3
C4
C5
U2
C6
C7
P1
C
B
A
1 32