Technical data

6
MVME51005E Single Board Computer Installation and Use (6806800A38B)
53
6 Pin Assignments
Introduction
This chapter provides information on pin assignments for various jumpers and connectors on
the MVME5100 Single Board Computer.
Summary
The following tables summarize all of the jumpers and connectors:
Jumper Settings
The following table provides information about the jumper settings associated with th
MVME5100 Single Board Computer. The table below provides a brief description of each
jumper and the appropriate setting(s) for proper board operation.
Jumper Description Connector Description
J1 RISCWatch Header J3 IPMC761 Interface
J2 PAL Programming
Header
J8 Memory Expansion
J4 Ethernet Port 2
Configuration
J25 PCI Expansion Interface
J11 - J14 PMC Interface (Slot 1)
J6, J20 Operation Mode
Jumpers
J21 - J24 PMC Interface (Slot 2)
J7 Flash Memory Selection P1, P2 VMEbus Interface
J10, J17 Ethernet Port Selection J9
J18
Ethernet Interface
(LAN1)
Ethernet Interface
(LAN2)
J15 System Controller (VME) J19 COM1 Interface
J16 Soldered Flash
Protection
J5 COM2 Interface
Jumper Description Setting Default
J1 RISCWatch Header None (Factory Use Only) N/A
J2 PAL Programming Header None (Lab Use Only) N/A