Technical data

MVME51005E Single Board Computer Installation and Use (6806800A38B)

1 Hardware Preparation and Installation

Multiple MVME5100 boards may be installed in a single VME chassis; however, each must have

a unique VMEbus address. Other MPUs on the VMEbus can interrupt, disable, communicate

with, and determine the operational status of the processor(s).

Installation

This section discusses the installation of PMCs onto the MVME5100, installation of PMCspan

modules onto the MVME5100, and the installation of the MVME5100 into a VME chassis.

Note

If you have ordered one or more of the optional RAM500 memory mezzanine boards

for the MVME5100, ensure that they are installed on the board prior to proceeding. If

they have not been installed by the factory, and you are installing them yourself, please

refer to Chapter 5, RAM500 Memory Expansion Module, for installation instructions. It

is recommended that the memory mezzainine modules be installed prior to installing

other board accessories, such as PMCs, IPMCs or transition modules.

Figure 1-1. MVME5100 Layout

2788 0406

P1 P2

J22 J24 J12 J14

J21 J23 J11 J13

XU1 XU2

J25

J10 J17

J10

J15

PCI MEZZANINE CARD

10/100 BASE T10/100 BASE T DEBUG

PCI MEZZANINE CARD

SCSI

BUSY

PIB

BUSY

J20

HAWK

ASIC

J9 J18 J19