Technical data

Programmable Configuration Data

MVME4100 Single Board Computer Programmer’s Reference (6806800H19B)

Notes

1. This data is not static. Each board must be assigned with an entity unique to the board

assembly number.

2. The method used to program the Product Identifier, Factory Assembly Number, and Serial

Number packets requires that these packets be located in absolute fixed locations. For this

reason, these packets shall have fixed sizes and shall immediately follow the header.

3. This data is not static. Each board's Serial Number packet must be unique. The board's

serial number is obtained from the onboard serial number label.

86 00 BINARY Vendor Identifier

87 EC

88 D5 BINARY Device Identifier

89 51

8A 08 BINARY Single device width in bits

8B 01 BINARY Number of devices or sockets present

8C 01 BINARY Number of interleave columns

8D 08 BINARY Column width in bits

8E 08 BINARY Minimum write/erase data width in bits

8F 02 BINARY Flash bank number

90 2D BINARY Flash access speed in nanoseconds: 0x2D = 45 ns

91 xx BINARY Total bank size [(1<<n)*256K bytes]: 0x0E = 4 GB,

0x0F = 8 GB.

Refer to Table A-4.

92 FF BINARY Not Used

::::

1FF FF BINARY Not Used

Table A-3 Static VPD Contents (continued)

Offset (HEX) Data (HEX) Field Type Description