Technical data

Programmable Configuration Data
MVME4100 Single Board Computer Programmer’s Reference (6806800H19B)
76
A.10 VPD Contents for MVME4100 Boards
The following tables describe the VPD data to be programmed into U49. Table A-3 contains
only the static VPD data and Table A-4 on page 83 contains only the variable VPD data. This
information is subject to change (under authority of an engineering change order). If a
difference is noted between either or these tables and your board, please contact your support
representative to determine which is accurate.
Table A-3 Static VPD Contents
Offset (HEX) Data (HEX) Field Type Description
00 45 ASCII Eye-Catcher ("EMERSON") Note: Lowest CRC byte for
the calculation of CRC.
01 4D
02 45
03 52
04 53
05 4F
06 4E
07 20
08 02 BINARY Size of VPD area in bytes. The size is viewed as
logical; it is not the size of the EEPROM. 512 bytes in
this VPD architecture
09 00
0A 0F BINARY VPD Revision Packet
0B 04 BINARY # of Bytes
0C 00 BINARY Board Type: Processor Board
0D 03 BINARY Architecture Revision
0E 00 BINARY Board Build Revision
0F 00 BINARY Revision Reason Flags
10 01 BINARY Product Identifier Packet
Refer to Notes 1 and 2.
11 14 BINARY # of bytes