Technical data

Programmable Configuration Data

MVME4100 Single Board Computer Programmer’s Reference (6806800H19B)

A.3 Vital Product Data (VPD) Introduction

The data listed in the following tables are for general reference information. The VPD identifies

board information that may be useful during board initialization, configuration and

verification. This section includes information on how to perform various tasks to read, modify

and correct Vital Product Data, as well as specific format and content information for this

product. Information that is contained in the VPD includes:

z Marketing Product Number (MVME4100-0171, MVME4100-0173)

z Factory Assembly Number (0106855E03x, 0106855E04x)

z Serial number of the specific MVME4100

z Processor family number (xxx)

z Hardware clock frequencies (internal, external, fixed, PCI bus)

z Component configuration information (connectors, Ethernet, addresses, flash bank ID, L2

cache ID)

z Security information (VPD type, version and revision data, 32-bit CRC protection)

A.4 How to Read and Modify VPD Information

vpdDisplay may be used to display VPD information.

vpdEdit can be used to modify the VPD information.

A.5 What Happens if VPD Information is Corrupted

If the VPD information becomes corrupted, the following occurs:

z A warning message is displayed in the startup banner.

z The firmware ignores the VPD contents and attempts to acquire information from other

sources.

z Some device drivers will not work.

z Some diagnostic tests will fail.

z The board will run much slower than usual.