Technical data

Transition Module

MVME4100 Single Board Computer Installation and Use (6806800H18D)

5.5.2 Ethernet Connectors (GIGE/J41B, GIGE/J2B,GIGE/J2A)

The MVME4100 routes two 10/100/1000Mb/s full duplex Ethernet interfaces to the VMEbus

P2 connector. The MVME7216E routes these from the P2 connector to the RJ-45 connectors on

RTM panel. These connectors include integrated LEDs for speed and activity indication. The pin

assignments for these connectors are as follows:

5.5.3 Serial Port Connectors (COM1/J41A, COM2—COM5/J2A-D)

The MVME4100 routes four asynchronous serial port interfaces, SP1 — SP4, to the VMEbus P2

connector. The MVME7216E routes these from the P2 connector to the RJ-45 connectors on

RTM panel. The pin assignments for these connectors are as follows:

Table 5-7 Ethernet Connectors Pin Assignment

Pin # Signal 1000 Mb/s 10/100 Mb/s

1MDIO0+_DA+TD+

2MDIO0-_DA- TD-

3 MDIO1+ _DB+ RD+

4MDIO1-_DC+Not Used

5MDIO2+_DC- Not Used

6MDIO2-_DB- RD-

7 MDIO3+ _DD+ Not Used

8MDIO3-_DD- Not Used

Table 5-8 COM Port Connector Pin Assignments

Pin Signal

1No connect

2RTS

3GND

4TX

5RX

6GND