Technical data

Controls, LEDs, and Connectors
MVME4100 Single Board Computer Installation and Use (6806800H18D)
59
3.3 Front Panel
The following switch, LEDs, and connectors are available on the MVME4100 front panel.
3.3.1 Reset/Abort Switch
The MVME4100 has a single push button switch to provide both the abort and reset functions.
When the switch is depressed for less than 3 seconds, an abort interrupt is generated to the
MPC8548E PIC. If the switch is held for more than 3 seconds, a board hard reset is generated. If
the MVME4100 is the VMEbus system controller, a VME SYSRESET is generated.
Figure 3-2 Front Panel LEDs, Connectors, Switch
PMC 1
PMC 2
GENET 2
ABT/RST
SPEED
ACT
GENET 1
SPEED
ACT
USER 1
FAIL
COMM 1
USB