Technical data

Hardware Preparation and Installation
MVME4100 Single Board Computer Installation and Use (6806800H18D)
55
The console settings for the MVME4100 are:
z Eight bits per character
z One stop bit per character
z Parity disabled (no parity)
z Baud rate of 9600 baud
Verify that hardware is installed and the power/peripheral cables connected are appropriate for
your system configuration.
Replace the chassis or system cover, reconnect the chassis to the AC or DC power source, and
turn the equipment power on.
2.8 Factory Installed Linux
A bootable ramdisk based Linux image based on the 2.6.27 kernel is available in NOR flash. To
boot this image, use the following MOTLOAD commands:
MVME4100> bmw -af8000000 -bf8f00000 -c2000000 execP -12000400
The image should boot to the following prompt:
Emerson Network Power Embedded Computing Linux
Kernel 2.6.27 on a MVME4100 localhost login:
Login as root.
The /root/README.MVME4100_LINUX file provides a brief overview of MVME4100 Linux.
Contact Emerson Network Power Embedded Computing for kernel patches and additional
information on using MVME4100 Linux.