Technical data
Hardware Preparation and Installation
MVME4100 Single Board Computer Installation and Use (6806800H18D)
52
7. Reinstall the MVME4100 assembly in its proper card slot.
Be sure the module is well seated in the backplane connectors. Do not damage or
bend connector pins.
8. If the PMC module was installed in a non-hot swap chassis, replace the chassis or
system cover(s), reconnect the system to the AC or DC power source and turn the
equipment power on.
2.5.3 XMCspan
The XMCspan is a carrier module that provides PCI Express expansion capability to the
MVME4100. Refer to the XMCspan Installation and Use manual for details about the XMCspan
and the installation procedure.
Figure 2-6 Typical Placement of a PMC Module on a VME Module