Technical data

MVME3100 Single Board Computer Installation and Use (6806800G36A)

Pin Assignments Planar sATA Power Connector (J30)

5.2.8 Planar sATA Power Connector (J30)

There is one 2mm pitch header installed as a planar header on the MVME3100 board to provide

power to a serial ATA (sATA) drive mounted on the board or somewhere within the chassis. The

pin assignments for this header are as follows:

5.2.9 USB Connector (J27)

There is one USB Type A connector located on the MVME3100 front panel. The pin

assignments are as follows:

51 No Connect No Connect 52

53 +5V No Connect 54

55 No Connect No Connect 56

57 No Connect +3.3V 58

59 No Connect No Connect 60

61 No Connect No Connect 62

63 No Connect No Connect 64

Table 5-13 MVME721 Host I/O Connector (J10) Pin Assignments (continued)

Pin Signal Signal Pin

Table 5-14 Planar sATA Power Connector (J30) Pin Assignments

Pin Signal

1+5V

2+5V

3GND

4GND

Table 5-15 USB Connector (J27) Pin Assignments

Pin Signal

1 USB_VBUS (+5.0V)

2 USB_DATA-

3 USB_DATA+

4GND