Specifications

Default Value: –
Press ENTER to select when you want to update the firmware via
network.
You will not be able to select this setting if you do not have
Internet access or there is nothing to update.
Update via USB
Default Value: –
Press ENTER to select when you want to update the firmware via
USB.
You will not be able to select this setting if a USB storage device
is not connected or there is nothing to update in the USB storage
device.
Wait for a while if "Firmware Update" cannot be selected. It will appear
when the network function is started up.
Initial Setup
You can make the initial setup from the setup menu.
Setting is not possible if "1. Input/Output Assign" - "Monitor Out" is set to
"SUB".
Wait for a while if "Initial Setup" cannot be selected. It will appear when
the network function is started up.