Specifications

settings.
"Off": When not using the Bluetooth function
Direct Change
Default Value: On
The input of the unit will automatically be switched to "BLUETOOTH"
when connection is made from a Bluetooth-enabled device to the unit.
"On": The input will automatically become "BLUETOOTH" when a
Bluetooth-enabled device is connected.
"Off": The function is disabled.
If the input is not switched automatically, set to "Off" and change the
input manually.
Auto Reconnect
Default Value: On
This function automatically reconnects to the Bluetooth-enabled device
connected last when you change the input selector to "BLUETOOTH".
"On": Use this function
"Off": Do not use this function
This function may not work depending on your Bluetooth-enabled
device.
Wakeup via Bluetooth
Default Value: Off
This function wakes up the unit on standby by connecting a Bluetooth-
enabled device.
"On": Use this function
"Off": Do not use this function
Setting to "On" increases the power consumption even when the unit
is on standby. However, the increase in power consumption is kept
to a minimum by automatically entering the HYBRID STANDBY
mode, where only the essential circuit is operating.
"Wakeup via Bluetooth" is fixed to "Off" if "Direct Change" is set to
"Off".
Pairing Information
Default Value: –
When paring is performed, the information of the previous pairing
stored in this unit will be initialized.
Pressing ENTER when "Clear" is displayed initializes the pairing