Specifications

mode.)
If you operate the MASTER VOLUME control of the unit when this
setting is set to "On" and you are listening to the audio through the
speakers of your TV, audio will be output also from the speakers
connected to the unit. If you want to output from only either of them,
change the unit or TV settings, or reduce the volume of the unit.
If abnormal operation occurs when you set the setting to "On", set it
to "Off".
When connecting a non-CEC compatible component, or when you
are not sure whether it is compatible, set the setting to "Off".
When changing this setting, turn off and then on again the power of
all connected components.
HDMI Through
Default Value: Off
You can display the video of an HDMI connected player on the TV even
if the unit is in standby mode. This setting is effective only for an input
selector to which an HDMI jack is assigned in "HDMI Input". It cannot
be set to any other input selector unless an HDMI jack is assigned to it.
"Off": The setting is disabled. Video of device connected to any jack will
not be displayed.
"BD/DVD", "CBL/SAT", "STB/DVR", "GAME", "PC", "AUX", "TV/CD",
"PHONO": Video of the device connected to the HDMI IN jack assigned
to each input will be displayed on the TV.
"Last": Video of the device connected to the HDMI IN jack assigned to
the input selector that was selected immediately before the unit enters
standby mode will be displayed on the TV.
"Auto": Video of all the devices connected to the HDMI IN jacks will be
output to the TV.
"Auto (Eco)": Video of all the devices connected to the HDMI IN jacks
will be output to the TV. If you select this setting when using a CEC-
compatible TV, you can reduce the power consumption in standby
mode.
When "HDMI Through" is enabled, the power consumption
increases even when the unit is on standby. However, the increase
in power consumption is kept to a minimum by automatically
entering the HYBRID STANDBY mode, where only the essential
circuit is operating.
"Auto" and "Auto(Eco)" cannot be selected if "HDMI CEC (RIHD)" is
set to "Off".
When changing the setting, turn off and then on again the power of
all connected components.
Audio TV Out (MAIN)