Specifications

4.Source Setup

Adjust the volume level difference among the multiple devices connected to

this unit, rename an input selector, or adjust the image quality. The setting

can be separately set to each input selector button. When you select a

desired input to check the video or audio, start playback of the connected

device.

AccuEQ Room Calibration

Default Value: Off

Enable/disable the sound field set in automatic speaker setup

"On": Enable this function

"Off": Disable this function

In the following cases, the setting cannot be changed:

– Automatic speaker setup is not performed.

– Headphones are connected.

IntelliVolume

Default Value: 0 dB

Adjust the volume level difference between the devices connected to

the unit. Select a value between "-12 dB" to "+12 dB". Set a negative

value if the volume of the target device is larger than the others and a

positive value if smaller.

This function is not effective in Zone 2.

Name Edit

Set an easy name to each input. The set name will be shown on the main

unit display.

Name

Default Value: Input name

Advanced Settings