Specifications

This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Back
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
The setting is displayed if "Speaker Configuration" - "Back" is set to
other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed when "Speaker Settings" - "Powered
Zone 2" is set to "Yes" and Zone 2 is turned on.
Surround Left
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
Subwoofer
Default Value: 0 dB
Select a value between "-15 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
Height Left
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height Speakers Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Height Right
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height Speakers Type" is set to "Not Use".