Specifications

Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
The setting is displayed if "Speaker Configuration" - "Back" is set to
other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed when "Speaker Settings" - "Powered
Zone 2" is set to "Yes" and Zone 2 is turned on.
Surround Left
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
Subwoofer
Default Value: 12.0ft/3.60m
Specify the distance between each speaker and the listening position.
Height Left
Default Value: 9.0ft/2.70m
Specify the distance between each speaker and the listening position.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height Speakers Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Height Right
Default Value: 9.0ft/2.70m
Specify the distance between each speaker and the listening position.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height Speakers Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
When the speaker is set to "No" or "None" in "Speaker Configuration", the
settings for "Speaker Distance" cannot be changed:
Default values vary depending on the regions.
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are
automatically configured if you use the Automatic Speaker Setup.