Specifications

"Dolby Enabled Speaker (Surround)" cannot be selected if "Speaker
Configuration" - "Surround" is set to "None".
Powered Zone 2
Default Value: No
Set presence of speaker terminal connection of Zone 2
"Yes": When speakers are connected to ZONE2 speaker terminals
"No": When speakers are not connected to ZONE2 speaker terminals
If "Front Speakers Type" is set to "Bi-Amp", this setting will be set to
"No".
For impedance, check the indications on the back of the speakers or their
instruction manual.
Speaker Configuration
Allows you to change the speaker configuration such as presence or not of
each speaker, crossover frequency, and so on. Settings are automatically
configured if you use the Automatic Speaker Setup. Audio will not be output
while you are making this setting.
Subwoofer
Default Value: Yes
Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Front
Default Value: 100Hz
Select the frequency to start outputting frequencies (crossover
frequency) for each channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"Front" will be fixed to "Full Band" if "Subwoofer" is set to "No", and
the bass frequencies of the other channels will be output from the
front speakers. To make the settings, refer to the instruction manual
of the speakers used.
Center
Default Value: 100Hz
Select the frequency to start outputting frequencies (crossover
frequency) for each channel from "40Hz" to "200Hz".